High Power LED Light Bulbs

LEDs are better! Light bulbs with high power LEDs provide long life. Light bulbs made with LEDs offer clean pure white light and great colors! LED light bulbs are shock and vibration resistant, and LED bulbs are direct screw-in replacements.Please do yourself some good by reading the information we have provided here on high power medium Edison base LED bulbs to help you with selection of proper bulbs for the specific use they are intended for. The information will also tell you what kind of LED bulbs we offer, how the LED bulb you want operates with respect to light generated and how it is generated. Without this information, you will not know what LED bulb to buy, or if what you want to buy is the right LED bulb for you.

Heat is the enemy of a LED. It can tolerate only what the manufacturer builds into it. Without the means to dissipate the heat created by the actual operating current applied to the LED to generate light, the LEDs will die a premature death. The high powered LED bulbs will have currents of 350-700mA plus running through them. Its a small amount compared to a standard light bulb. But, it is applied to a tiny piece no larger than 5/16" in diameter. This small section of material must take on 350-700mA which is huge for its size. This why so much heat is generated from so little electricity. There is no place for the current to go back to or to run to.

View Angle. The high powered LED bulbs are offered within 10° to 60° and wider beam width or view angle of the LED. The total volume of light between a 20 degree view angle and a 60 degree view angle LED bulb is the same. But, the concentration of light with a narrower 20 degree view angle LED bulb makes them seem brighter because you see all of it in a smaller space. The wider view angle LED bulb will appear much less bright and that is because the same light volume has been spread wide. There is minimal light spread outside of the stated view angle.

Color Temperature.
White LED bulbs will be at 6000k plus (may have a bluish tint).
Daylight White LED bulbs will between 5000 and 5500k.
Cool White LED bulbs will be between 4200k and 4500k Color Temperature.
Warm white LED bulbs will be between 2800k and 3300k Color Temperature.
The larger the number, the colder or bluer tint to the light will be visible.

Standard Medium or E27 base LED bulbs are drop-in replacements for household sockets all over the world. Most of these high powered LED bulbs will operate on dual voltage - 85vac to 260vac making them universally applicable anywhere in the world.

MR16 type LED bulbs fit into two very small diameter holes in a flat socket spaced about 5cm apart. They will not fit into any other size MR socket. The same applies to the MR11 LED bulbs, or other type MR bulb.

The high powered LED light bulbs are listed with the watts that the LED is rated to consume. That changes a bit as the electronics also require power and effect the actual watts consumed. But in general, they do not amount to much more than 1 watt total. With that said, we will also state the beam width or LED view angle, how many lumen and watts of light are generated buy these high powered LED bulbs. That is all the number information we will provide as any more than that confuses the subject of light volume or brightness.

Warranty. ALL high powered LED bulbs have a 1 year warranty against defect. Defect does not include or mean excessive voltage coverage. Dual voltage means the bulb will switch internally from 110/120vac to 220/240vac as is appropriate for the country it is used in. Voltage way above 130vac will still have the potential to burn out the LED.