Details of LED flood light:
Chai Tai high power led flood light was made of multiple chips led module as the light source, adopt with high quality aluminum Raw materials as the heat sink to make the flood light have a good lifespan; it can be added with sensor or sound control system to make it as a new flood light function. Widely used in high building, tunnel, park, bridge and so on. High lumen, high quality, and good reliability, welcome your inquiry.
Basic parameters of LED flood light:
1) 10W led flood light
3) Input Voltage: 100V-240V/50~60Hz
4) Color: warm white, commercail white, pure white or cool white
5) Lumens: 800Lm
7) Beam Angle: 120 degrees
8) Lifetime: >50000 hours
9) Warranty: two years
Features of LED flood light:
1. Energy cost saving
For its higher luminous efficacy up to 100Lm/w, 60-70% energy cost saving compared to the traditional HPS Lamps.
2. Instant ON/OFF operation
This is one of the superior features of LED lightings.You don’t need to wait for any second.
3. Warranty Policy
2 years warranty with original written warranty ; 20,000 switch cycles(on/off switching).
4. Low Light Loss
The light source is the low light loss and high-bright LED, which the loss is less than 5% in 10,000 hours.The aluminum back-side housing performs an excellent heat dissipation,which guarantees a lower junction temperature of the LED,thus slow down light loss.
While working, no ultraviolet light and infrared light radiation. And never contain any hazardous substance, such as Lead and Mercury.
Large-size square LED chip, and the light transmittance efficiency of the PC-cover can reach 95%.
While working, no ultraviolet light and infrared light radiation. And never contain any hazardous substance, such as Mercury.
Solid-state,anti-vibration, not easy to be broken.
Application of LED flood light:
1) Landscaping building,
3) wall washing for bars
8) plazas and art galleries.
|Description||10W LED Flood Light ( Made of 1pcs 10W LED)|
|Input Frequency||50~60 Hz||Hz|
|Light source||10W multiple chips led module|